|
PRODUCT
DESCRIPTION: A specially modified
water-based acrylic coating that is non-hazardous and non-flammable. Good
for all poured concrete, masonry surfaces, stucco, masonry block, dry wall,
brick, metal and wood. Its special formulation provides a hard and durable
gloss finish that also seals the surface and provides easy removal of
graffiti with our Graffiti Cleaner. The coating is clear when dry.
TYPICAL USES: For industrial, commercial and residential use on surfaces
of metal, masonry, wood, poured concrete, stucco, brick and block.
PRODUCT ADVANTAGES: Safe * Economical * Effective * Fast * Water Clean-up * Low
VOC
Application
Instructions
Surface must be
clean and free from dirt and grease. Apply 2 coats by brush, roller or
spray in a uniform manner. Anti-Graffiti Coating may be applied on any
masonry, wood, metal or newly painted surface. Allow 24 hours drying time
before applying the second coat. Allow 72 hours for curing.
To remove graffiti,
rub Anti-Graffiti Cleaner onto graffiti with a dry cloth. Wait 3 to 5
minutes and wipe off. This cleaner is not to be used on graffiti unless our
Anti-Graffiti Coating has been applied. When graffiti is removed a new coat
of Anti-Graffiti Coating need not be applied as the area remains protected.
Anti-Graffiti
Coating is engineered to be maintenance free. Some stains and pollution
will come off with rainwater. Especially stubborn stains can be removed
with clean water and detergent.
|
