Anti-Graffiti Coating
 (250-300 sq.ft./gal.)

PRODUCT DESCRIPTION: A specially modified water-based acrylic coating that is non-hazardous and non-flammable. Good for all poured concrete, masonry surfaces, stucco, masonry block, dry wall, brick, metal and wood. Its special formulation provides a hard and durable gloss finish that also seals the surface and provides easy removal of graffiti with our Graffiti Cleaner. The coating is clear when dry.

TYPICAL USES: For industrial, commercial and residential use on surfaces of metal, masonry, wood, poured concrete, stucco, brick and block .

PRODUCT ADVANTAGES: Safe * Economical * Effective * Fast * Water Clean-up * Low VOC

COLOR: Milky - Dries Clear

PHYSICAL CONSTANTS:

* Physical State: Viscous liquid

* Solids: By Volume: 30.32% By Weight: 32.59%

* pH: 8

* Coating VOC: 1.1 Lb/Gal (132 Grams/Liter)

* Flash Point: N/A

* Recommended Mil Film: Wet: 5 mils; Dry: 1.7 mils (2 coats recommended)

APPLICATION:

Method: Brush, Roll or Spray

Theoretical Coverage: 250-300 sq. ft. (2 coats recommended)

Estimated Dry Time: To Touch 30 minutes to 2 hours depending on temp; Recoat in 24 Hours; Fully Cures in 72 Hours

Application Instructions: Apply when surface and ambient temperatures are above 55 degrees and below 90 degrees. See Brochure

SHIPPING & STORAGE

Container Type: 1 Gallon * 5 Gallon Pail
Shipping Weight: 9 lbs. * 45 lbs.

Average Shelf Life: 12 months minimum from date of manufacture when maintained in protected storage. Storage at 40-100 degrees Fahrenheit

MATERIAL SAFETY DATA SHEETS

View MSDS

Elastomeric Wall Coating
 (120 sq.ft./gal.)

PRODUCT DESCRIPTION: A specially formulated flexible 100% acrylic coating specifically designed for use on a variety of surfaces. It's unique formulation provides excellent durability, superior fade resistance and a smooth low sheen that resists cracking, peeling, and chipping while bridging hairline cracks. This above grade coating is designed to withstand wind driven rains up to 100 miles/hr. while it allows moisture vapors from within the structure to evaporate and escape out through the membrane. As it is very resistant to salts and other elements, it is superior to paints for homes/structures that are located near harsh weather conditions such as beaches. Designed for exterior use only.

TYPICAL USES: For residential, commercial, and industrial use on concrete block walls, brick walls, poured concrete walls, stucco, metal, and wood.

PRODUCT ADVANTAGES: Versatility * Durability * Bridges Hairline Cracks * Resists Cracking & Peeling * Waterproofs * Low Temperature Flexibility * Applies Easily * Water Clean-Up * Low Sheen * Low VOC

COLOR: Eleven Colors (May Tint with 888 Universal Colorant)

Sandpoint, Sahara Tan,

Sequoia Brown, Coffee,

Clay, Brick,

Sussex Gray,

London Fog (has color of cement - note: new color,  not shown on chart),

Courtyard Grey,

Patio Green

White

Note: Custom Colors can also be made with a minimum order of 50 gallons.

PHYSICAL CONSTANTS:

* State: Thick Liquid

* Thinning: Stir thoroughly & apply as it comes from container - DO NOT THIN

* Solubility in Water: Dilutable. Supplied at normal application viscosity DO NOT THIN

* Flash Point: 248 Deg. F

* Freezing Point: 0 degrees C./32 degrees F.

* Coating VOC: 0.71 lb./gal. - (86 grams/liter)

* Solids: By volume: 47.57% (varies by color) By Weight: 60.76% (varies by color)

* Film Thickness: Wet: 10.0 mils; Dry: 5.0 mils (Estimated at 100 sq.ft./gal)

APPLICATION:

Method: Brush, Roll or Spray

Theoretical Coverage: 1st COAT: 50-125 sq.ft./gal. depending on roughness of surface 2nd COAT: 100-125 sq.ft./gal. Manufacturer recommends two (2) coats.

Estimated Dry Time: To Touch in 4-6 Hrs; Recoat in 24 Hrs; Fully Cured in 72 Hrs

Application Instructions: See Brochure

SHIPPING & STORAGE

Container Type: 1 Gallon * 5 Gallon Pail
Shipping Weight: 11.6 lbs. * 58 lbs.

Average Shelf Life: 12 months minimum from date of manufacture when maintained in protected storage. Storage at 40-100 degrees Fahrenheit

MATERIAL SAFETY DATA SHEETS

View MSDS

Resflex Elastomeric Roof Coating
 (120 sq.ft./gal.)

PRODUCT DESCRIPTION: A high-build, 100% acrylic emulsion waterproof roof coating designed for application on asphalt, urethane foam, concrete and properly prepared metal roofs. It provides superior protection from the suns ultra-violet rays and its unequaled elasticity provides protection and durability. It resists water penetration, is mildew resistant and bridges existing hair-line cracks on the substrate during application as well as those that form after application. Designed for exterior use only. Ten Year Warranty.

Apply our Envirosafe Mastic to repair larger splits and cracks in roofs before application of the Resflex Elastomeric Roof Coating.

TYPICAL USES: For residential, commercial and industrial use on asphalt shingles, concrete, cement tile, tar & gravel, polyurethane foam, modified bitumen and metal decking roofs.

PRODUCT ADVANTAGES: Versatility * Durability * Bridges Hairline Cracks * Resists Cracking * Mildew Resistant Waterproofs * Low Temperature Flexibility * Applies Easily * Water Clean-Up  * Low VOC

COLOR: White (May Tint with 888 Universal Colorant)

PHYSICAL CONSTANTS:

* State: Thick Liquid

* Thinning: Stir thoroughly & apply as it comes from container - DO NOT THIN

* Solubility in Water: Dilutable. Supplied at normal application viscosity DO NOT THIN

* Flash Point: 214 Deg. F

* Freezing Point: 0 degrees C./32 degrees F.

* Coating VOC: 0.92 lb./gal. - (111 grams/liter)

* Solids: By volume: 51.23%  By Weight: 64.42%

* Film Thickness: Wet: 10.0 mils; Dry: 5.0 mils (Estimated at 100 sq.ft./gal)

APPLICATION:

Method: Brush, Roll or Spray

Theoretical Coverage: 1st COAT: 50-125 sq.ft./gal. depending on roughness of surface 2nd COAT: 100-125 sq.ft./gal. Manufacturer recommends two (2) coats.

Estimated Dry Time: To Touch in 2-4 Hrs; Recoat in 24 Hrs; Fully Cured in 72 Hrs

Application Instructions: See Brochure

SHIPPING & STORAGE

Container Type: 1 Gallon * 5 Gallon Pail
Shipping Weight: 11.6 lbs. * 58 lbs.

Average Shelf Life: 12 months minimum from date of manufacture when maintained in protected storage. Storage at 40-100 degrees Fahrenheit

MATERIAL SAFETY DATA SHEETS

View MSDS

Clear Armor Coat for Wood
 (200 sq.ft./gal.)

PRODUCT DESCRIPTION: A premium quality, 100% acrylic, low sheen, fluid coating that forms a seamless membrane over bare porous substrates. Dries clear and provides a durable flexible finish. Resists salt spray, mildew and weathering.

TYPICAL USES: For industrial, commercial and residential use on weather exposed surfaces of all types of wood. Applications include coating  wood shingles, roof tiles, wood siding, decks, docks, picnic tables, and playsets.

PRODUCT ADVANTAGES: Product Versatility * Superior Durability * Seals & Waterproofs * Flexible * Dries Clear * Environmentally-Safe * Non-Toxic * Non-Flammable * Low VOC * Mildew Resistant * Weather Resistant * Provides Protective Barrier Against Arsenic Leaching From Chromated Copper Arsenate (CCA) Pressure-Treated Wood

COLOR: Clear, Minimal Sheen

PHYSICAL CONSTANTS:

* Thinning: DO NOT THIN!

* Coating VOC.: 0.40 lb./gal. - (48 grams/Liter)

* Solids: By Volume: 34.53% By Weight: 35.16%

* Mil Film: Wet: 1.7 mils; Dry: Minimal (Estimated at 220 sq.ft./gal.)

* Vehicle: 100.0% Pigment: 0.0%

* Flash Point: Non-Flammable

APPLICATION:

Method: Brush, Roll or Spray

Theoretical Coverage: 100-300 square feet per gallon

Estimated Dry Time: Touch: 30 minutes - 1 hour; Fully Dry: 3 hours

Application Instructions: See Brochure

SHIPPING & STORAGE

Container Type: 1 Gallon * 5 Gallon Pail
Shipping Weight: 8.61 lbs. * 55 lbs.
Average Shelf Life: 12 months minimum from date of manufacture when maintained in protected storage. Storage at 40-100 degrees Fahrenheit

MATERIAL SAFETY DATA SHEETS

View MSDS