|
PRODUCT
DESCRIPTION: A specially formulated
flexible 100% acrylic coating specifically designed for use on a variety of
surfaces. It's unique formulation provides excellent durability, superior
fade resistance and a smooth low sheen that resists cracking, peeling, and
chipping while bridging hairline cracks. This above grade coating is
designed to withstand wind driven rains up to 100 miles/hr. while it allows
moisture vapors from within the structure to evaporate and escape out
through the membrane. As it is very resistant to salts and other elements,
it is superior to paints for homes/structures that are located near harsh
weather conditions such as beaches. Designed for exterior use only.
Available in eleven colors.
TYPICAL USES: For residential, commercial, and industrial use on concrete
block walls, brick walls, poured concrete walls, stucco, metal, and wood.
PRODUCT ADVANTAGES: Versatility * Durability * Bridges Hairline Cracks * Resists
Cracking & Peeling * Waterproofs * Low Temperature Flexibility *
Applies Easily * Water Clean-Up * Low Sheen *
Low VOC
Application
Instructions
Good surface
preparation is essential to a satisfactory coating system. Surface to be
coated should be clean and dry. Remove all dirt, dust, oil, grease, mildew,
rust, loose or cracked paint, or other contamination with Enviro-Clean
Cleaner Degreaser or Nu Look Concrete Cleaner. Rinse thoroughly and
allow to dry approximately 24 hours.
Apply Envirocoat
Elastomeric Wall Coating with a brush, roller or sprayer. Apply in sections
only. If applying with a roller, use a 3/8' - 3/4' nap roller cover. Allow
first coat to dry overnight before applying second coat. Two coats are
recommended.
|
