Picture Gallery
Enviro-Clean Cleaner/Degreaser Takes out tough grease and oil stains. A concentrate that covers 1000 sq.ft./gal. once diluted with 10 gallons of water. |
Nu Look Concrete Cleaner Restores dirty concrete to its "New Look" finish. |
|
 |
Rust / Stain Remover -- Before Pour on Rust Stain Remover and watch the rust bubble up from the surface. |
Rust / Stain Remover -- After Can also apply to painted surfaces without harming the surface or surrounding plants. |
|
 |
Easy Brick Cleaner Very effective in cleaning red or dark colored brick and block. It will not harm mortar.Afterwards, apply penetrating Trojan Masonry Sealer to protect against future stains. |
Red Clay Stain Remover Although we recommend using a power washer, the red clay came out just using a garden hose in this picture. |
|
 |
Efflorescence Remover-- Before Efflorescence occurs as a result of the salts pushing to the surface of the masonry as shown in this photo. |
Efflorescence Remover-- After Once the salts are removed, apply Trojan Masonry Sealer to keep the efflorescence from returning. |
|
 |
Efflorescence Remover-- Before Efflorescence often shows up in the mortar joints of tiles such as this picture shows. (pictures courtesy of Floor-Restore in Bristow, VA) |
Efflorescence Remover-- After Our cleaner effectively cleaned off the efflorescence without harming the tiles. |
|
 |
Algae Mildew Remover -- Before This cleaner removes algae, mildew, mold and mold spores. Apply Trojan Masonry Sealer afterward to reduce future growth. |
Algae Mildew Remover -- After Can be safely applied to concrete, brick, stone, stucco, split face block, tile, shingles, grout, porcelain & plastic |
|
 |
Erase Cleaner -- Before This is an industrial plant floor that was covered with dirt and various resins. |
Erase Cleaner -- After Erase effectively cleaned this floor by pouring just a few ounces in its concentrated form and then spread around. It cleaned the surface in 3 minutes. |
|
 |
Enviro Clean Degreaser & Nu Look Concrete Cleaner Sometimes using a combination of our products can help take off really tough stains such as this oil soaked gas station island. Use Enviroclean first to take off the surface oils, scrub and power wash then apply the Nu Look Cleaner, scrub and power wash. This pH "shock" of going from a high pH cleaner to low pH cleaner helps immulsify the oils that are embedded in the concrete. The Nu Look further takes out the carbon shadows that are often left over from vehicle oil.
|
Rust / Stain Remover & Erase Cleaner Although the oil was mostly gone from this garage floor, the carbon shadow stain was left over. Rust/Stain Remover was first applied to open the pores of the concrete and washed off. Erase was then applied to help take off any residual carbon stains and subsequently rinsed off. |
 |
 |
Trojan Masonry Sealer A non-toxic, low VOC penetrating sealer that easily applies on brick, concrete, masonry, stone and stucco. Only requires one coat & dries clear with no shine. |
Trojan Masonry & Trojan Color Sealer Trojan Masonry Sealer seals this brick paver (applied on the left side) without changing the look of it. It will also help reduce efflorescence and algae-mildew growth. The Trojan Color Sealer (shown on the right side of the paver) provides a "wet look" to the paver as well as waterproofs. |
|
 |
Trojan Color Sealer -- Before An aggregate driveway. |
Trojan Color Sealer -- After Trojan Color Sealer provided a whole new look to this driveway once the "Rustic Brown" color was applied. |
|
 |
Trojan Color Sealer -- Before Before applying Trojan Color Sealer these pavers were first cleaned using our Easy Brick Cleaner. (pictures courtesy of Restoration Specialists) |
Trojan Color Sealer -- After Trojan Color Sealer can rejuvate your pavers and provide a protective waterproofing in one product! Trojan Color Sealer also looks great on your concrete. The pictures on the color chart are actual digital photos of a garage floor.
|
|
 |
|
Faded stamped concrete. (pictures courtesy of Precision Roof and Surface Cleaning in Norco, CA)
|
Trojan Color Sealer -- After This application included a 50/50 mix of Trojan Color Sealer in "Rocky Grey" and our clear Trojan Ultra. This effectively lightened the color yet still provided the same durable waterproofing and stain resistance.
|
|
 |
Trojan Color Sealer -- Before A concrete pool deck
|
Trojan Color Sealer -- After A few coats of "Ocean Blue" color frames this pool quite nicely. |
|
 |
1.jpg)
