|
PRODUCT
DESCRIPTION: A unique water-based polyester
and acrylic
formula manufactured for the effective and safe treatment for the
preservation of all wood surfaces. This sealer is intended to be used
before the application of paint or other top coats. This sealer effectively
holds finish coats of paint on the surface thereby requiring less material.
TYPICAL USES: For industrial, commercial, and residential use. A one of a
kind product for home owners, general contractors, waterproofing
contractors, paper mills, lumber yards and government agencies.
PRODUCT ADVANTAGES: is the most effective wood sealer on the market because
unlike most top coat sealers, the Trojan Beta-Z actually penetrates the
fibers of the wood thereby providing superior protection. It is non-flammable, non-caustic and non-toxic. Will not
harm aquatic life.
Application
Instructions
Good surface preparation is
essential to a satisfactory coating system. Surfaces to be coated should be
clean and dry. Remove all dirt, dust, oil, grease, mildew, rust, loose or
cracked paint, or other contamination with either Enviro-Clean Cleaner
Degreaser or Algae-Mildew Cleaner & Retardant. Rinse
thoroughly and allow to dry. Apply one coat with brush, roller or sprayer.
Allow wood to absorb as much Trojan Beta-Z Wood Sealer as possible. One
gallon covers 200 square feet. Afterwards for a finish coat apply Clear
Armor Coat for Wood or any quality acrylic, oil-based, epoxy, urethane or
polyurethane coating.
|
