Material Safety Data Sheets for Eco-Wares Cleaners.

Eco-Wares®

Economical, Eco-Friendly Cleaners, Sealers and Coatings

Note: Please click on "About Us" link to visit our newest website

Order Toll Free

866-874-8070

Cleaner

Material Safety Data Sheets

Enviro-Clean Cleaner / Degreaser
(10:1 gal. mix)

SECTION I - IDENTIFICATION:

TRADE NAME: Enviro-Clean

DOT CLASSIFICATION: Non-Hazardous, Non-toxic, Non-flammable

SECTION II - INGREDIENTS:

Non-ionic Biodegradable surfactants

Oxygenating glycol surfactant

SECTION III - PHYSICAL DATA:

APPEARANCE: Pink

VAPOR PRESSURE: N/A

VAPOR DENSITY: N/A

SOLUBILITY IN WATER: Infinite

BOILING POINT: 210F

pH: 10.8

SPECIFIC GRAVITY: 1.083

EVAPORATION RATE: Water = 1, Less than 1

VOC: N/A

SECTION IV - FIRE & EXPLOSIVE DATA:

FLASH POINT: None, Open Cup

EXTINGUISHING MEDIA: None, Water

UNUSUAL FIRE & EXPLOSIVE HAZARDS: None

SECTION V - REACTIVITY:

STABILITY: Stable

HAZARDOUS POLYMERIZATION: Will not occur

INCOMPATIBILITY MATERIALS: None

HAZARDOUS DECOMPOSITION: N/A

SECTION VI - HEALTH HAZARD DATA:

EFFECTS OF OVER EXPOSURE

EYE CONTACT: Eye irritation, redness, burning

SKIN: irritation, redness, itching, dryness

INHALATION: dizziness, nausea

INGESTION: nausea, vomiting, abnormal cramps

CARCINOGENICITY: This product contains no substance or compounds which are considered to be carcinogenic by OSHA, NAPM IARC OR SARA TITLE III, SECTION 313.

EMERGENCY AND FIRST AID PROCEDURES:

SKIN CONTACT: wash with soap and water, rinse for 15 minutes

EYE CONTACT: Flush with water for 15 minutes

INHALATION: Remove to fresh air

INGESTION: Give a few glasses of water to dilute. Seek medical attention.

Enviro-Clean NP7-Blue
(10:1 gal. mix)

SECTION I - IDENTIFICATION:

TRADE NAME: Enviro-Clean NP7-Blue

SECTION II - INGREDIENTS:

Non-Ionic Biodegradable surfactant

No hazardous components ( As per 29 CFR 1910 1200)

SECTION III - PHYSICAL DATA:

APPEARANCE: Blue

VAPOR PRESSURE: No solvents

VAPOR DENSITY: No solvents

SOLUBILITY IN WATER: Infinite

pH: 7

BOILING POINT: 210 Degrees F

SPECIFIC GRAVITY: 1.083

EVAPORATION RATE (WATER = 1): Less than 1

SECTION IV - FIRE & EXPLOSIVE DATA:

FLASH POINT: None, OPEN CUP

EXTINGUISHING MEDIA: None, Water

UNUSUAL FIRE & EXPLOSIVE HAZARDS: None

SECTION V - REACTIVITY:

STABILITY: Stable

HAZARDOUS POLYMERIZATION: Will not occur

INCOMPATIBILITY MATERIALS: None

HAZARDOUS DECOMPOSITION: N/A

SECTION VI – HEALTH HAZARD DATA:

EMERGENCY AND FIRST AID PROCEDURES:

EYE CONTACT: Flush with potable water

SKIN CONTACT: May irritate very sensitive skin, flush with water

INGESTION: If swallowed, drink large amounts of water and induce vomiting

SECTION VII – PRECAUTIONS FOR SAFE HANDLING & USE:

MATERIAL RELEASED OR SPILLED: Rinse with water and flush to drain.

WASTE DISPOSAL METHOD: Rinse with water and flush to drain. Readily biodegradable. Compatible with approved sewerage disposal systems.

PRECAUTIONS TO BE TAKEN IN HANDLING AND STORING: Keep out of reach of children. For industrial and professional use only. Will freeze at 31 degrees F, if freezing occurs thaw and stir gently to remix.

SECTION VIII – CONTROL MEASURES:

RESPIRATORY PROTECTION: If used for prolonged periods in concentrate we suggest approved NIOSH respirator.

PROTECTIVE GLOVES: Not needed for recommended dilutions.

EYE PROTECTION: Wear goggles.

SECTION IX – STORAGE AND HANDLING

STORAGE CONDITIONS: KEEP FROM FREEZING

DO NOT STORE IN STRONG SUNLIGHT

Nu Look Concrete Cleaner
(300 sq.ft./gal.)

SECTION I - IDENTIFICATION:

TRADE NAME: Nu Look Concrete Cleaner

DOT CLASS: Corrosive, Non-toxic, non-combustible

CHEMICAL NAME: Mixture, water-based

SECTION II - INGREDIENTS:

Non-ionic biodegradable surfactant

Monohydrochloride of an acid and trihydride of phosphorous

All other ingredients are considered non-hazardous

SECTION III - PHYSICAL DATA:

APPEARANCE/ODOR: Light yellow/sharp odor

VAPOR PRESSURE: (mm Hg) Greater

SOLUBILITY IN WATER: Completely

BOILING POINT: 100C/212F Using test tube method

FREEZING POINT: 32 F (Liquid only)

SPECIFIC GRAVITY: (H20 1) 1.0 - 1.2 AT 24 C.

EVAPORATION RATE: LESS THAN 1 - water

% VOLATILE BY WEIGHT: N/A

pH: 1.0

WEIGHT: 10.00+/- .02

% SOLIDS: 2%=/- .02

VISCOSITY: More than water

SECTION IV - FIRE & EXPLOSIVE DATA:

In case of fire use media applicable for surrounding area.

SECTION V - HEALTH HAZARD DATA: EFFECTS OF OVER EXPOSURE: INHALATION:

May cause irritation in the respiratory tract

EYE CONTACT: Can cause irritation, redness and discomfort

INGESTION: Can cause irritation and discomfort in the stomach

SKIN CONTACT: Irritation, redness, itching and dryness

EMERGENCY AND FIRST AID PROCEDURES:

EYE CONTACT: Flush with water

SKIN CONTACT: Wash with soap and water

INHALATION: Remove to fresh air

INGESTION: Give a few glasses of water to dilute. Seek medical help

SECTION VI - SPILL OR LEAK HANDLING INFORMATION:

PERSONAL PROTECTION: Rubber gloves are recommended. If exposed to material during clean-up operations, see the first-aid procedures for actions to follow. May neutralize spilled material with Sodium bicarbonate (Baking Soda)

SECTION VII - STORAGE AND HANDLING:

Storage conditions: KEEP FROM FREEZING.

DO NOT STORE IN STRONG SUNLIGHT.

Rust / Stain Remover
(200-250 sq.ft./gal.)

SECTION 1 - IDENTIFICATION:

TRADE NAME: Rust Stain Remover

DOT CLASS: Corrosive, Non-combustible, Non-toxic

CHEMICAL NAME: Mixture, water-based

SECTION II - INGREDIENTS:

Non-ionic biodegradable surfactant

Monohydrochloride of an acid

SECTION III - PHYSICAL DATA:

APPEARANCE/ODOR Yellow/sharp odor

BOILING POINT: 212 F

SPECIFIC GRAVITY: 8.7 WT. +/- .04

SOLUBILITY IN WATER: Excellent

EVAPORATION RATE: Same as water

% VOLATILE BY VOL: N/A

pH: <1.0

VAPOR PRESSURE: N/A

VAPOR DENSITY: N/A

SECTION IV - FIRE & EXPLOSIVE DATA:

In case of fire use media applicable for surrounding area.

SECTION V - HEALTH HAZARD DATA:

EFFECTS OF OVER EXPOSURE:

INHALATION: May cause irritation in the respiratory tract

EYE CONTACT: Can cause irritation, redness and discomfort

INGESTION: Can cause irritation and discomfort in the stomach.

SKIN CONTACT: Irritation, redness, itching and dryness

EMERGENCY AND FIRST AID PROCEDURES:

EYE CONTACT: Flush with water

SKIN CONTACT: Wash with soap and water

INHALATION: Remove to fresh air

INGESTION: Give a few glasses of water to dilute. Seek medical help

SECTION VI - SPILL OR LEAK HANDLING INFORMATION:

PERSONAL PROTECTION – Rubber gloves are recommended. If exposed to material during clean-up operations, see the first-aid procedures for actions to follow. May neutralize spilled material with Sodium bicarbonate (Baking Soda)

SECTION VII - STORAGE AND HANDLING:

Storage conditions: KEEP FROM FREEZING.

DO NOT STORE IN STRONG SUNLIGHT.

Easy Brick Cleaner
(200-250 sq.ft./gal.)

SECTION 1 - IDENTIFICATION:

TRADE NAME: Easy Brick Cleaner

DOT CLASS: Corrosive, Non-combustible, Non-toxic

CHEMICAL NAME: Mixture, water-based

SECTION II - INGREDIENTS:

Non-ionic biodegradable surfactant

Monohydrochloride of an acid

SECTION III - PHYSICAL DATA:

APPEARANCE/ODOR: Orange-Yellow/sharp odor

BOILING POINT: 212 F

SPECIFIC GRAVITY: 8.7 WT. +/- .04

SOLUBILITY IN WATER: Excellent

EVAPORATION RATE: Same as water

% VOLATILE BY VOL: N/A

pH: <1.0

VAPOR PRESSURE: N/A

VAPOR DENSITY: N/A

SECTION IV - FIRE & EXPLOSIVE DATA:

In case of fire use media applicable for surrounding area.

SECTION V - HEALTH HAZARD DATA:

EFFECTS OF OVER EXPOSURE:

INHALATION: May cause irritation in the respiratory tract

EYE CONTACT: Can cause irritation, redness and discomfort

INGESTION: Can cause irritation and discomfort in the stomach.

SKIN CONTACT: Irritation, redness, itching and dryness

EMERGENCY AND FIRST AID PROCEDURES:

EYE CONTACT: Flush with water

SKIN CONTACT: Wash with soap and water

INHALATION: Remove to fresh air

INGESTION: Give a few glasses of water to dilute. Seek medical help

SECTION VI - SPILL OR LEAK HANDLING INFORMATION:

SECTION VII - STORAGE AND HANDLING:

Storage conditions: KEEP FROM FREEZING.

DO NOT STORE IN STRONG SUNLIGHT.

Efflorescence Remover
(250 sq.ft./gal.)

SECTION I - IDENTIFICATION:

TRADE NAME: Efflorescence Remover

DOT CLASS: Corrosive, Non-combustible, Non-toxic

SECTION II - INGREDIENTS:

HAZARDOUS COMPONENTS - 8% BY WEIGHT

Proprietary Acid

Non-ionic biodegradable surfactant

SECTION III - PHYSICAL DATA:

APPEARANCE / ODOR: Non-viscous liquid with a yellow color and a sharp odor

VAPOR PRESSURE: (mmHg) Greater

SOLUBILITY IN WATER: Completely

BOILING POINT: 100 C / 212 F using the Test Tube Method

FREEZING POINT: 32 F (Liquid only)

SPECIFIC GRAVITY (H20=1): 1.0 - 1.2 AT 24 C

EVAPORATION RATE: Less than 1 - water

% VOLATILE BY WEIGHT: N/A

pH: 1.0

WEIGHT: 10.00 +/- .02

% SOLIDS: 2 % =/- .02

VISCOSITY: more than water

SECTION IV - FIRE & EXPLOSIVE DATA:

FLASH POINT: No flashing using TCC ASTM D-56 - N/A

EXTINGUISHING MEDIA: Non-combustible

FLAMMABLE LIMIT: LEL - N/A, UEL - N/A

UNUSUAL FIRE AND EXPLOSIVE HAZARDS: None known

SPECIAL FIRE FIGHTING PROCEDURES: None

SECTION V - REACTIVITY:

STABILITY: stable

CONDITIONS TO AVOID: strong acids and oxidizers

HAZARDOUS DECOMPOSITION PRODUCTS: None known

HAZARDOUS POLYMERIZATION: Will not occur

SECTION VI - HEALTH HAZARD DATA:

EFFECTS OF OVER EXPOSURE

EYE CONTACT: Eye irritation, redness, burning

SKIN: Irritation, redness, itching, dryness

INHALATION: Dizziness, nausea

INGESTION: Nausea, vomiting, abnormal cramps

CARCINOGENICITY: This product contains no substance or compounds which are considered to be carcinogenic by OSHA, NAPM IARC OR SARA TITLE III, SECTION 313.

EMERGENCY AND FIRST AID PROCEDURES:

SKIN CONTACT: wash with soap and water, rinse for 15 minutes

EYE CONTACT: Flush with water for 15 minutes

INHALATION: Remove to fresh air

INGESTION: Give a few glasses of water to dilute. Seek medical attention.

Red Clay Stain Remover
(200-250 sq.ft./gal.)

SECTION 1 - IDENTIFICATION:

TRADE NAME: Red Clay Stain Remover

DOT CLASS: Corrosive, Non-combustible, Non Toxic

CHEMICAL NAME: Mixture, water-based

SECTION II - INGREDIENTS:

Non-ionic biodegradable surfactant

Proprietary acids

SECTION III - PHYSICAL DATA:

APPEARANCE/ODOR: Red-Orange/sharp odor

BOILING POINT: 212 F

SPECIFIC GRAVITY: 8.7 WT. +/- .04

SOLUBILITY IN WATER: Excellent

EVAPORATION RATE: Same as water

pH =<1.0

% VOLATILE BY VOL:- N/A

VAPOR PRESSURE: N/A

VAPOR DENSITY: N/A

SECTION IV - FIRE & EXPLOSIVE DATA:

In case of fire, use media applicable for surrounding area.

SECTION V - HEALTH HAZARD DATA: EFFECTS OF OVER EXPOSURE:

INHALATION: May cause irritation in the respiratory tract

EYE CONTACT: Can cause irritation, redness and discomfort

INGESTION: Can cause irritation and discomfort in the stomach.

SKIN CONTACT: Irritation, redness, itching and dryness

EMERGENCY AND FIRST AID PROCEDURES:

EYE CONTACT: Flush with water

SKIN CONTACT: Wash with soap and water

INHALATION: Remove to fresh air

INGESTION: Give a few glasses of water to dilute. Seek medical help

SECTION VI - SPILL OR LEAK HANDLING INFORMATION:

PERSONAL PROTECTION: Rubber gloves are recommended. If exposed to material during Clean-up operations, see the first-aid procedures for actions to follow.

SECTION VII - STORAGE AND HANDLING:

Storage conditions: KEEP FROM FREEZING.

DO NOT STORE IN STRONG SUNLIGHT.

Algae - Mildew Cleaner

(300 sq.ft./gal.)

SECTION I - IDENTIFICATION:

TRADE NAME: Algae & Mildew Cleaner

DOT CLASS: Non-flammable, Non-combustible, Corrosive

SECTION II - INGREDIENTS:

Sodium Hypochlorite, Sodium Hydroxide

Non-ionic biodegradable surfactant

All other components are considered to be non-hazardous as per OSHA 29 CFR.1910.1200.

SECTION III - PHYSICAL DATA:

APPEARANCE / ODOR: Non-viscous liquid – pale yellow – slight chlorine odor

VAPOR PRESSURE: (mmHg) Greater

SOLUBILITY IN WATER: Completely

BOILING POINT: 100 C / 212 F using the Test Tube Method

FREEZING POINT: 32 F (Liquid only)

SPECIFIC GRAVITY: (H20 1) 1.0 - 1.2 AT 24 C

EVAPORATION RATE: Less than 1 - water

% VOLATILE BY WEIGHT: N/A

pH: 11.5

WEIGHT: 10.00 +/- .02

% SOLIDS: 2 % =/- .02

VISCOSITY: more than water

SECTION IV - FIRE & EXPLOSIVE DATA:

FLASH POINT: No flashing using TCC ASTM D-56 - N/A

EXTINGUISHING MEDIA: Non-combustible

FLAMMABLE LIMIT: LEL - N/A, UEL - N/A

UNUSUAL FIRE AND EXPLOSIVE HAZARDS: None known

SPECIAL FIRE FIGHTING PROCEDURES: None

SECTION V - REACTIVITY:

STABILITY – stable

INCOMPATIBILITY – Aluminum, acid-base materials and ammonia

CONDITIONS TO AVOID – Strong acids and oxidizers

HAZARDOUS DECOMPOSITION PRODUCTS – None known

HAZARDOUS POLYMERIZATION – Will not occur

SECTION VI - HEALTH HAZARD DATA: EFFECTS OF OVER EXPOSURE

EYE CONTACT – Eye irritation, redness, burning

SKIN – Irritation, redness, itching, dryness

INHALATION – Dizziness, nausea, irritation

INGESTION – Nausea, vomiting, abnormal cramps

EMERGENCY AND FIRST AID PROCEDURES:

SKIN CONTACT – Wash with soap and water, rinse for 15 minutes

EYE CONTACT – Flush with water for 15 minutes

INHALATION – Remove to fresh air

INGESTION – Give a few large amounts of water to dilute. Seek medical attention.

SPILL OR LEAK HANDLING INFORMATION:

Dilute with water and mop up. Dispose in accordance with all local and federal laws in dealing with a hypochlorite solution.

Erase Cleaner
(5:1 gal. mix)

SECTION I - IDENTIFICATION:
TRADE NAME: Erase Cleaner
DOT CLASSIFICATION:  Non-toxic, Non-flammable, Non-Hazardous, Non-Corrosive


SECTION II - INGREDIENTS:
Water – CAS # 7732-18-5
Hazardous components (AS PER 29 CFR 1910 1200)   OSHA PEL             ACGH TLV        %
2-Butoxyethanol- CAS# 111-76-2                                       TWA 50ppm            25ppm                7
Ethanolamine CAS# 141-43-5                                            TWA 3ppm              TWA 3ppm        3
                                                                                                                                 STEL 6ppm

SECTION III - PHYSICAL DATA:
APPEARANCE - Clear Liquid, Butyl Odor      pH of a 1% Solution: 10.5 
VAPOR PRESSURE - N/A
VAPOR DENSITY - N/A
SOLUBILITY IN WATER -  Complete
BOILING POINT - 210F
SPECIFIC GRAVITY - 1.05
EVAPORATION RATE (Butyl Acetate=1) - Slower than Water

SECTION IV - FIRE & EXPLOSIVE DATA:
FLASH POINT - None, Open Cup    LEL: N/A      UEL: N/A
EXTINGUISHING MEDIA - Non-Flammable
UNUSUAL FIRE & EXPLOSIVE HAZARDS - None

SECTION V - REACTIVITY:
STABILITY - Stable
HAZARDOUS POLYMERIZATION - Will not occur
INCOMPATIBILITY MATERIALS - Acidic Products
HAZARDOUS DECOMPOSITION - N/A


SECTION VI - HEALTH HAZARD DATA:
EFFECTS OF OVER EXPOSURE
EYE CONTACT - Eye irritation, redness, burning
SKIN - Irritation, redness, itching, dryness
INHALATION - Dizziness, nausea
INGESTION - Nausea, vomiting, cramps
CARCINOGENICITY - This product contains NO substance or compounds which are considered to be

carcinogenic by OSHA, NAPM IARC OR SARA TITLE III, SECTION 313.
EMERGENCY AND FIRST AID PROCEDURES:
SKIN CONTACT - Flush affected skin with cool water for 15 minutes. 
EYE CONTACT - Flush with cool water for 15 minutes. 
INHALATION- Remove to fresh air
INGESTION - If swallowed, DO NOT INDUCE VOMITING. Rinse mouth, then immediately drink large

quantities of milk or vinegar. If none of these are available, drink large quantities of water. 
SEE  PHYSICIAN IF DEEMED NECESSARY IN ALL CASES

SECTION VII- PRECAUTIONS FOR SAFE HANDLING AND USE
STEPS TO BE TAKEN IN CASE MATERIAL IS SPILLED:
1. Contain spill, absorb and store in container.
2. Wash all surfaces with clear water.
WASTE DISPOSAL METHOD: Dispose according to local regulations.

SECTION VIII – CONTROL MEASURES IN CASE OF LARGE SPILL

RESPIRATION PROTECTION - Use Adequate Ventilation

VENTILATION - LOCAL EXHAUST: Yes                             SPECIAL: N/A
                                 MECHANICAL: N/A                                   OTHER: N/A
PROTECTIVE WEAR - Wear Rubber Gloves       
EYE PROTECTION - Goggles